??体育滚球平台??

Material seal pump . Professional manufacturer of pneumatic conveying equipment
MC-Ⅱ Pulse Dust Collector
MC-Ⅱ Pulse Dust Collector

MC-Ⅱ pulse dust collector is a small bag dust collector designed by Fucheng Machinery after absorbing the advanced technology of similar foreign products. This pulse bag type dust collector uses high pressure (0.5-0.7Mpa) large flow pulse valve to inject dust from the filter bag. Compared with other domestic single machines, the pulse bag dust collector has the characteristics of large kinetic energy and high efficiency. And small size, light weight, simple and compact structure, easy installation, and convenient maintenance (external filter type), the pulse dust collector is widely used in building materials, metallurgy, mining, chemical industry, coal, non-metallic ore ultrafine powder processing, etc. The gas purification treatment system is an ideal equipment for environmental protection and dust removal.

Pulse dust collector working principle

Dust-containing gas enters the ash hopper from the air inlet, or enters the filter bag chamber through the open flange port. The dust-containing gas is filtered by the dust collector filter bag into the clean air chamber, and then passes through the clean air chamber exhaust port by the fan Drain away. Dust accumulates on the outer surface of the filter bag, and it continues to increase, so that the resistance of the bag dust collector continues to increase. In order to prevent the equipment resistance from exceeding 1200Pa, the bag dust collector can continue to work. It is necessary to periodically remove the dust on the filter bag. The pulse valve is started by the PLC program controller in a timed sequence, so that the compressed air (0.5-0.7Mpa) in the air bag is ejected by the blowing pipe (called primary air) and the ambient air induced by the venturi tube is several times the primary air (called two The secondary air) enters the filter bag of the material seal pump to make the filter bag rapidly expand in an instant, and the dust is shaken off with the reverse force of the air flow to achieve the purpose of dust removal.

Pulse bag filter specifications and technical performance

Specifications Filtration area
(m 2 )
Number of filter bags
(article)
Number of pulse valves
(Number)
Air volume
(m 3 )
Compressed air consumption
(m 3 / min)
MC-Ⅱ-24 18 twenty four 4 3240-6480 0.2-0.7
MC-Ⅱ-36 27 36 6 5400-10800 0.25-1
MC-Ⅱ-48 36 48 8 7550-15100 0.3-1.3
MC-Ⅱ-60 45 60 10 10800-21600 0.1-0.3
MC-Ⅱ-72 54 72 12 2160-4320 0.1-0.5
MC-Ⅱ-84 63 84 14 4320-8640 0.2-0.9
MC-Ⅱ-96 72 96 16 6480-12960 0.3-1.2
MC-Ⅱ-120 90 120 20 8650-17300 0.4-1.7

Gongyi Fucheng Machinery Factory is the earliest professional manufacturer of material-sealed pump equipment. Based on the introduction of foreign advanced technology, our factory has developed a new type of low-pressure pneumatic force based on the introduction of foreign advanced technologies for various problems in different types of domestic pneumatic conveying equipment and cooperation with the Building Materials Institute Conveying material sealed pumps are widely used in electric ash removal, cement homogenization and inversion storage, various powdery materials transportation, high efficiency and low consumption, fully enclosed, no pollution, no maintenance, air source can choose Roots fan, compressed air .

After years of development, our factory has formed three complete product systems: low-pressure pneumatic conveying equipment, mechanical conveying equipment and ash storage equipment, which are widely used in many fields such as cement, electric power, building materials, metallurgy, and chemical industry. Our factory has always adhered to the principle of quality first and credit first, and established a set of one-stop quality management system from parts processing to the whole factory's delivery, and implemented computer-aided system optimization design for all products.

七乐彩 欢乐拼三张 和丰娱乐 真人游戏平台注册